company |  leathers |  samples |  news |  media |  contact

Full grain leather with even coloration throughout the entire hide. Superior selection of European and New Zealand cattle hides are hand selected for Lena. These hides are recognized industry wide for their clean surfaces and excellent cutting yields. Luxurious soft hand and smooth supple surface make this one of the most beautiful leathers available. The protective finish allows Lena to be suitable for most public and private environments.

Lena is processed using low emission mineral tanning formulas which are environmentally respectful. The hides are retanned in aged oak drums using vegetable agents, natural fat liquors and oils along with dyes that ensure the leather is properly through dyed. Complies with the strict regulations of the EU environmental normative CE2000/53. Natural color variations may occur even within the same dye lot.









































































To request a sample, please check the box under your desired color, and click Submit.

Processing and Finishing


Lena is processed using low emission mineral tanning formulas which are environmentally friendly. The hides are retanned in aged oak drums using vegetable agents, natural fat liquors and oils along with dyes that ensure the leather is properly through dyed. No PCP or CFC is used during the tanning process. Waterbased finishes are applied to provide an even coloration and protection to the leather.

Lena Technical Specifications


Application: Contract, Hospitality, Residential
Raw Material: European and New Zealand
Hide Size: Average hide size 48 sqft
Thickness: 0.9 to 1.0 mm
Wet Rub Test: IUF 450/UNI EN ISO 11640: > 4 grey scale
Dry Rub Test: IUF 450/UNI EN ISO 11640: > 4 grey scale
Abrasion: (ASTM D 3884-92) 500 gram load: 1000 cycles
Abrasion: Wyzenbeek (ASTIM D4157) 100,000 Rubs
Alkaline ph 8: IUF 450/UNI EN ISO 11640: > 4 grey scale
Flexing Endurance: IUP 20: >30,000
Tear strength: IUP 40/UNI EN ISO 3377-1: ≥ 20 N
Adhesion: IUF 470/UNI EN ISO 11644: ≥ 3.50 N/cm
Water repellency: AATCC22-201: 93
Light resistance (xenon test): IUF 402/ UNI EN ISO 105-B02: 5 blue scale
Flammability Resistance: UFAC 1. CAL TB 117-2013. NFPA 260.
Origin: Italy

Contract | Hospitality | Aviation | Residential | Hair on Hides

4524 Green Point Dr, Suite 101
Greensboro, NC 27410
336.315.9720